以太網界面 |
|
2個10/100BaseTX冗余以太網口
| |
|
RJ-45, 自適應MDI/MDI-X | |
|
|
|
|
|
IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS,SSH, SNTP, SMTP | |
串口界面 |
|
|
|
RS-232, RS422, 2/4-wire RS485 | |
|
|
|
|
|
|
|
odd, even, none, space, mark | |
|
|
|
TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD | |
|
|
|
|
|
|
|
XON/XOFF, RTS/CTS, DTR/DSR | |
|
|
|
2*pin 120ohm DIP撥碼開關 | |
DI/O |
|
|
|
5V/TTL Logic 0: 0.8V max (0-0.8V) Logic 1: 2.0V min (2-5V) | |
|
|
|
5V/TTL Logic 0: 0.8V max (0-0.8V) Logic 1: 2.0V min (2-5V) | |
性能 |
|
Power 1/Power 2: Startup (紅色) ; Ready (綠色) 以太網口: 左:100M Link (綠色常亮) / Activity (綠色閃爍) 右: 10M Link (橙色常亮) / Activity (橙色閃爍) 串口1/2/3/4: TX only (綠色) , RX only (紅色) , Both RX/ TX (橙色) |
|
|
Windows工具 - JetPort Commander, HTTPS, SSH | |
|
Virtual COM, TCP Server, TCP Client, TCP Tunnel 和 UDP | |
|
軟件恢復默認設置,硬件重置按鈕 | |
|
|
|
冗余設備聯網,自愈時間小于200ms | |
|
|
|
|
|
設備狀態, VCOM狀態 | |
|
RFC1213 MIB II, RFC1317 RS232_like 和 SNMP Trap | |
|
自動通過郵件對預設事件進行報警 | |
|
遠程日志服務器模式,或本地模式顯示 | |
|
冷啟動/熱啟動,登錄失敗, IP及密碼變更, Access IP Blocked, 串口DCD / RI / DSR / CTS 狀態變化, 串口連接/斷連 | |
Windows 工具 |
|
設備檢索, 自動IP回報, 網絡設置, 設備及串口設置監控,通告設置, Firmware升級, 設置備份還原, 批量設置精靈 | |
|
Virtual COM, TCP Server, TCP Client, TCP Tunnel 和 UDP | |
|
TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval time | |
|
JetPort Commander: 批量IP設置,批量Firmware升級,批量設置備份/還原,VCOM及TCP Tunnel設置精靈 | |
電源需求 |
|
PWR1: 12~48VDC 電源接線端子 PWR2: 12~48VDC電源適配器 | |
|
1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5 | |
|
|
機械規格 |
|
145mm(W) x 46.5mm(H) x 120mm(D) | |
|
FCC Class A, CE Class A, RoHS | |
工作環境 |
|
|
|
|
|
|
|
|