首頁＞Intel半導體＞LXT9785EHC-C2

英特爾 LXT9785/LXT9785E 快速以太網 8 端口 PHY

      采用了低功率、高性能的Intel LXT9785芯片,使10/100Base-T 端口在一般五類線上的連接距離可以高達200米。 此外,阿爾卡特還在其交換機中集成了英特爾LXT9785 10/100 8端口收發機 （transceiver）, 它可通過低功耗和多接口簡化多端口交換機的設計。

      The LXT9785 and LXT9785E are Intel's lowest power, highest performance octal 10/100 transceivers. The Intel LXT9785/9785E transceivers simplify multi-port switch design through low power, previous-generation register compatibility, and multiple interfaces. The LXT9785/9785E transceiver complies with all applicable requirements of IEEE 802.3 standards and demonstrates superior Ethernet performance with operation up to 200 meters.       LXT9785 and LXT9785E are identical except for the Voice over IP (VoIP) telephony features included in the LXT9785E transceiver. The LXT9785E is an enhanced version of the LXT9785 that detects data terminal equipment (DTE) capable of being powered remotely from the switch over a Category 5 cable. The system can use the information collected by the LXT9785E to apply power over the cable if the link partner requires it, such as an IP telephone. The LXT9785E offers an easy to use solution for OEMs designing VoIP systems that need to be as robust as typical PBX-based telephone systems.

Product LXT9785/LXT9785E Features

• LXT9785/LXT9785E Eight independent 10Base-T, 100Base-TX, or 100Base-FX ports
• LXT9785/LXT9785E DTE discovery enables IP telephones to be powered remotely via a category 5 cable
• LXT9785/LXT9785E Low power consumption (250 mW/port typical)
• LXT9785/LXT9785E 2.5V operation
• LXT9785/LXT9785E Compatible with 2.5V and 3.3V I/O
• LXT9785/LXT9785E Multiple interfaces: RMII, SMII, SS-SMII
• LXT9785/LXT9785E Auto-MDI/MDIX
• LXT9785/LXT9785E Robust baseline wander correction
• LXT9785/LXT9785E Auto-negotiation, parallel detection
• LXT9785/LXT9785E MDIO Sectionalization for 1x8 or 2x4 configurations
• LXT9785/LXT9785E Register compatibility with LXT9781 and LXT9782
• LXT9785/LXT9785E Configurable via MDIO port or external control pins
• LXT9785/LXT9785E JTAG boundary scan
• LXT9785/LXT9785E Integrated termination resistors
• LXT9785/LXT9785E Superior EMI performance
• LXT9785/LXT9785E Intel Carrier Class Ethernet Support offers extended temperature (-40°C to +85°C) performance (LXT9785HE)

LXT9785/LXT9785E Key Applications

• LXT9785/LXT9785E Ethernet switches
• LXT9785/LXT9785E VoIP enabled Ethernet switches (LXT9785E)
• LXT9785/LXT9785E Storage area network equipment
• LXT9785/LXT9785E Harsh environment equipment

Intel Carrier Class Ethernet

     Many networking and telecom applications require high-performance Ethernet components capable of operating under harsh environmental conditions. Intel Carrier Class Ethernet products support operation over the entire extended temperature range while providing features that increase reliability. Each device has an operation lifetime of at least 10 years with less than 100 failures per billion hours. All Intel Carrier Class Ethernet devices will be available a minimum of 5 years from product introduction.       The Intel Carrier Class Ethernet product portfolio includes solutions for Ethernet physical layer, switching and repeater technologies at a variety of speeds. Intel Carrier Class Ethernet products are ideal for applications where equipment must function reliably in uncontrolled environmental conditions such as base stations, telecom/network switches, factory floor equipment, and industrial computers.

技術支持：
LXT9785/LXT9785E DataSheet