AT89C51CC03CA-RDTUM 帶有64K系統內可編程FLash存儲器PLCC-64封裝

AT89C51CC03CA-RDTUM 概述

The Atmel AT89C51CC03 is an 8051 based CMOS controller with PCA, Dual DPTR, WDT, 10 Bit ADC, Full CAN, 40 MHz High-Speed Architecture, X2 function, 32+2 I/O lines, 3 Timers/Counters, 14 Interrupts/4 priority levels, 64K FLASH, 2K EEPROM,256 Bytes on-chip RAM, additional 1K XRAM This document describes the UART bootloader functionalities as well as the serial protocol to efficiently perform operations on the on chip Flash (EEPROM) memories. Additiona l  infor m ation  on  the  AT89C51CC03  pr oduct  c an  be  found  in  the AT89C51CC03 datasheet and the AT89C51CC03 errata sheet available on the Atmel web site.

AT89C51CC03CA-RDTUM 特性

• 80C51 Core Architecture
• 256 Bytes of On-chip RAM
• 2048 Bytes of On-chip ERAM
• 64K Bytes of On-chip Flash Memory
  – Data Retention: 10 Years at 85°C
  – Read/Write Cycle: 100K
• 2K Bytes of On-chip Flash for Bootloader
• 2K Bytes of On-chip EEPROM
  Read/Write Cycle: 100K
• Integrated Power Monitor (POR: PFD) To Supervise Internal Power Supply
• 14-sources 4-level Interrupts
• Three 16-bit Timers/Counters
• Full Duplex UART Compatible 80C51
• High-speed Architecture
  – In Standard Mode:
  40 MHz (Vcc 3V to 5.5V, both Internal and external code execution)
  60 MHz (Vcc 4.5V to 5.5V and Internal Code execution only)
  – In X2 mode (6 Clocks/machine cycle)
  20 MHz (Vcc 3V to 5.5V, both Internal and external code execution)
  30 MHz (Vcc 4.5V to 5.5V and Internal Code execution only)
• Five Ports: 32 + 4 Digital I/O Lines
• Five-channel 16-bit PCA with
  – PWM (8-bit)
  – High-speed Output
  – Timer and Edge Capture
• Double Data Pointer
• 21-bit WatchDog Timer (7 Programmable Bits)
• A 10-bit Resolution Analog to Digital Converter (ADC) with 8 Multiplexed Inputs
• SPI Interface, (PLCC52 and VPFP64 packages only)
• Full CAN Controller
  – Fully Compliant with CAN Rev 2.0A and 2.0B
  – Optimized Structure for Communication Management (Via SFR)
  – 15 Independent Message Objects
  – Each Message Object Programmable on Transmission or Reception
  – Individual Tag and Mask Filters up to 29-bit Identifier/Channel
  – 8-byte Cyclic Data Register (FIFO)/Message Object
  – 16-bit Status and Control Register/Message Object
  – 16-bit Time-Stamping Register/Message Object
  – CAN Specification 2.0 Part A or 2.0 Part B Programmable for Each Message
  Object
  – Access to Message Object Control and Data Registers Via SFR
  – Programmable Reception Buffer Length Up To 15 Message Objects
  – Priority Management of Reception of Hits on Several Message Objects at the
  Same Time (Basic CAN Feature)
  – Priority Management for Transmission
  – Message Object Overrun Interrupt
  – Supports
  – Time Triggered Communication
  – Autobaud and Listening Mode
  – Programmable Automatic Reply Mode
  – 1-Mbit/s Maximum Transfer Rate at 8 MHz (1) Crystal Frequency in X2 Mode
  – Readable Error Counters
  – Programmable Link to On-chip Timer for Time Stamping and Network
  Synchronization
  – Independent Baud Rate Prescaler
  – Data, Remote, Error and Overload Frame Handling

AT89C51CC03CA-RDTUM 訂購型號

AT89C51CC03CA-RDTUM 技術支持

1. AT89C51CC03 數據手冊DataSheet 下載. PDF
2. 80C51微控制器的復位輸入. PDF (編號: Tech 8051 00049)
3. 80C51在系統Flash編程. PDF (編號:8051 00050)
4. Device Programmers for 8051 Devices (Other, updated 09/07)
   This Excel spreadsheet provide summary information on device programmers supporting Atmel 8051 microcontrollers
5. Emulators for 80C51 Devices (Other, updated 11/03)
   This Excel spreadsheet provide summary information on emulation support for Atmel 80C51 microcontrollers
6. Package Adapters of 80C51 Devices (Other, updated 10/04)
   This Excel spreadsheet list available package adapters for Atmel 80C51 microcontrollers